Key Specifications
CONTRAINDICATIONS:
Do not use on patients with known allergy to acrylic resins. In case of allergy, refer to a physician
CLEANING AND DISINFECTING
MULTI-USE DELIVERY SYSTEMS:
To avoid cross-contamination between patients this device requires mid-level disinfection. Immediately after use inspect device and label for deterioration. Discard device if damaged.
DO NOT IMMERSE:
Thoroughly clean device to prevent drying and accumulation of contaminants.
Disinfect with a mid-level registered healthcare-grade infection control product according to regional/national guidelines.
Direction to Use
1. PREPARATION
a) Clean the contact surface thoroughly using pumice and water and abrade the area to be relined.
2. MIXING
a) The standard powder/liquid ratio is 2.2g/1.8g, (first graduation on powder measure to 4 graduations of the liquid syringe).
Note:
Consistency may be varied by changing powder/liquid ratio.
b) Measure into the glass jar and mix for 30-60 seconds.
3. RELINING
a) Coat the mixture onto the denture as evenly as possible
b) Insert the denture in the mouth, muscle trim and retain it in the centric occlusal position for 4-5 minutes.
c) Remove and inspect for defects.
d) Dip the denture into cold water, and trim away excess at the periphery with a heated sharp instrument.
Reviews
There are no reviews yet.